Selve i-R Multi Send Plus
Manuales y guías de usuario para Selve i-R Multi Send Plus. Encontramos 4 manuales para descargas gratuitas Operating instructions, Owner's manual
Below you will find brief information for Remote Control i-R Multi Send Plus, Remote Control i-R Multi Send. This manual describes the operation of the SELVE i-R Multi Send and i-R Multi Send Plus radio timers for roller shutters and sun protection systems. The device can be used to control up to 5 groups of shutters individually or together. The i-R Multi Send Plus allows you to program up to 6 channels with separate times and additional features like the expert mode.
Características clave
Controls up to 5 groups of shutters
Automatic time control
Astro function (sunset)
Manual operation possible
Holiday function
Intermediate and ventilation position programming
Expert mode for precise settings
Language selection
Summer/Winter time adjustment
Easy transmitter programming
páginas: 124 Selve i-R Multi Send Plus Operating instructions
Marca: Selve Categoría: Smart home devices Tamaño: 2 MB
Idiomas: German, English, French, Dutch
Tabla de contenidos
Abrir manualOtros manuales y documentos
Frequently Answers and Questions
How do I program the i-R Multi Send/i-R Multi Send Plus?
The manual provides detailed instructions on programming the device, including setting the time, date, astro function, and various other settings. You can also refer to the chapter on "Programming" in the manual.
How do I learn a new transmitter to the receiver?
The manual outlines the procedure for learning transmitters. You will need to press the PROG button on the receiver for 3 seconds and then press the PROG button on the transmitter you wish to learn.
What is the range of the i-R Multi Send/i-R Multi Send Plus?
The maximum range of the device is up to 25 m indoors and up to 350 m in open field.
How do I reset the i-R Multi Send/i-R Multi Send Plus to factory settings?
Press the RESET button on the device (with a ballpoint pen or similar) to reset it to the factory default settings.
Preguntas y respuestas
X X J
How is the end limit position set?
The end limit position can be defined via the "SETTING" menu by selecting the "PROG END LIMIT" option.
Anuncio